We thank you very much for stopping
by.
Beechhurst Inc. Specialty Automotive Division
Contact Information is _here_
is proud to present the "Stage 2 DRL Module"
A very easy to install DRL Module.
This module is manufactured right here in New York City, using the best
components we could find, not the cheapest.
We kept this as simple as possible
to make it easy for you to get this in with the least amount of time!
Operation:
Daytime Running Lamps Module
Features:
A) Responds to "ignition on" with a 25 second delay. This allows your charging
system to be fully "up" before the lamps come on.
B) Extremely efficient, very low current draw.
C) Stabilization circuitry assures consistent operation.
D) Adjustable. This will allow you to get the lamp brilliance to exactly the
level you want.
E) Automatically shuts down when the lights are commanded "on".
F) Very easy to retro fit to existing lamp systems.
This control module is very easy to install. When you connect the LH and RH
lamps, you should install a 50W diode (we provide) into the lamp lead behind
the control module connection. This is to prevent the positive voltage from
the module from back feeding to the rest of your lighting system.
Not designed for HID systems. Incandescent or halogen lamp only.
Pricing: The module is $107.97, postpaid.
If you are in NYS, as you know, we MUST collect the sales tax. Please add
correct amount.
Limitations:
Although the power transistor is rated to 20 Amps,
you should really limit the load to not more than
2 Amps as heat starts to become an issue. At 2 amps, the module gets to full temperature
in 15 seconds, at this point the transistor and heat sink
is really hot!
All units have been tested and run to insure your
complete satisfaction.
Your comments and suggestions are well appreciated. We
would like to hear from you.
Payment:
We need a valid postal system address
as we will be using the USPS Priority Mail. Don't forget the sales
tax if you are in NYS!
Return Policy:
You can return any of our products for any reason. We only insist that the
product is not damaged.
We will issue a refund, less the shipping charge.
We want customers to be happy with their purchase, and encourage questions
to be resolved before a purchase is made. If you have any doubts about the
suitability of one of our products for your application, please call.
(800) 431-1384.
Disclaimers:
Successful installation of this control module depends on your ability to
properly install the module and connect the wires.
We cannot be held responsible for the
installation or any damage done during the installation. Your satisfaction
with this product is guaranteed by us. If you are not pleased, you can
return
it (undamaged) for a refund of the purchase price (less shipping
charges)
Thanks. We know you will find this product very useful.
Back to SAD Home Page
